CleanMax Zoom Owner's Manual download pdf (Page 14)

14

How To

Change the Belt – Model ZM-200

and ZM-400

CAUTION: First, unplug the vacuum cleaner

from the electrical outlet.

1. Turn the unit over and remove the

bottom plate (see “How to Remove

Bottom Plate”).

2. Remove the brushroll and the worn or

broken belt from the brushroll pulley and

the motor drive shaft (Fig. 20).

3. Loop the new belt around the

motor drive shaft and the brushroll

(Fig. 21).

4. Reinstall the brushroll back into the

housing. Turn the brushroll by hand,

making sure the belt is not twisted

and all rotating parts move smoothly

(Fig. 22).

5. Reinstall the bottom plate (see “How to

Install Bottom Plate”).

NOTE: To ensure maximum cleaning

efficiency, the belt should be checked

regularly to be sure it is in good condition.

Replace the belt if it is stretched, cracked,

or if excessive slipping is occurring.

Fig. 20

Fig. 21

Fig. 22

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments